Museum logo

Search Term Record

  • Email This Page
  • Send Feedback
Name Delta TechOps

Associated Records

Image of Delta High Air Pressure Servicing Tool  - 1959-mid 1970s

Delta High Air Pressure Servicing Tool - 1959-mid 1970s

High air pressure servicing tool for landing gear shock struts and hydraulic accumulators. When this tool is connected to the Scheader valve on accumulator or strut, with regulated pressure from the 3,000 p.s.i. nitrogen bottle and by opening/closing respective scheader valve, high presssure nitrogen air is safely admitted to the unit.

Image of Delta Douglas Brake Gauge - 1959-mid 1970s

Delta Douglas Brake Gauge - 1959-mid 1970s

This Delta Douglas Brake Gauge made of aluminum was an aircraft brake wear pin indicating tool. Mechanics used it to make an accurate check of brake wear on Douglas DC-8 and DC-9 aircraft during all phases of maintenance. Engraved on back with Part Number 10M-13130 and "Tyson 371."

Image of Delta Clarktor 21 Tug - ca. 1947

Delta Clarktor 21 Tug - ca. 1947

Dark blue painted tow tractor, or "tug." Brass plate: "Clarktor / Mfg. by Clark Equipment Co., Industrial Truck Division, Battle Creek, Michigan, U.S.A. / Model: CLARKTOR 21 / Serial No: CT21-20EC158" Second brass plate: "? by J.Q.M.D. / Date: 9-9-47 / Serial No. H4063/ Cap. 4000 lbs d.b.p. / M.D. CM 44" In 1990, the tug had a Delta "Flying D" logo decal on each side of the engine with the number 16000, but that has since been removed.

Image of Delta DC-3, NC28341, Ship 41, Model Airplane - 2002

Delta DC-3, NC28341, Ship 41, Model Airplane - 2002

Delta DC-3, NC28341, Ship 41, model airplane painted in Delta's bare metal livery from the 1940s. The "Delta" and the "NC28341" are decaled to the bottom of the wings. Model is plastic with propellers and back landing gear attached. Model has a metal and wooden base. Metal plate on the base reads: "A Token of Thanks to our Special Guests at MRO 2002 in Phoenix, Arizona." Scale - 1:75

Image of Clarkat CK30 Tug - ca. 1974

Clarkat CK30 Tug - ca. 1974

Dark blue painted tow tractor, or "tug" with off-white cushioned seats. Delta property tag: "Unit part No: 055929117/ NOMENCLATURE/ TUG/ CK30" Clarkat Model No. CK30 Serial No. CKF-127 2248 VIN: FCT-80-149-2027-1171 Year: circa 1974 Mercury Air Group Property Tag# 00210. Modifications: Engine dates from 1980s. Front of tug has been modified (lengthened to accommodate larger engine) at that time. July 2003: Tug overhauled by Delta technicians and painted Delta blue. Presentation plaque installed on tug reads, " Restoration Done By: Dana Alexander/ Eddie Faulkner/ Randy Marko/ Daniel Lewis."

Image of Reproduction Delta Mechanic Uniform Hat - 1999

Reproduction Delta Mechanic Uniform Hat - 1999

Kakhi hat with black plastic brim. On front of hat is a patch with Delta orange and blue 1934-1945 winged triangle logo patch. Inside is paper label in plastic sleeve with wearer's name "Bill Khourie"

Image of Platinum Moodallion - 2003

Platinum Moodallion - 2003

Delta fiberglass cow statue named "Platinum Moodallion," from Cow Parade Atlanta 2003, Cow Number 905. Cow has two front feet off ground, wears leather helmet and goggles, painted in Delta Colors in Motion aircraft livery with passengers painted on sides.

Image of Delta 85th Anniversary Time Capsule - 2014

Delta 85th Anniversary Time Capsule - 2014

Delta 85th Anniversary Time Capsule made from a Delta aircraft galley oven. Brass plaque on front, dedicating the time capsule in memory of Delta's principal founder, C.E. Woolman, is engraved: "All airlines are alike. Only people make them different. 'Quality begins with people.' - C.E. Woolman / June 17, 2014 / Commemorating Delta's 85th anniversary of passenger service." Signatures of Tech Ops employees on bottom. Almost 600 Delta employees and retirees submitted a memorable moment from their Delta careers for inclusion in the time capsule. A slot was created on top of the oven for collecting the notecards. Several notecards printed with memories are displayed on top of the oven under

Image of Delta TechOps Pneumatic Tube System Container - ca. 1975

Delta TechOps Pneumatic Tube System Container - ca. 1975

Delta TechOps Pneumatic Tube System Container. Black plastic with two strips of brown carpeting around the sides, and a silver-colored metal latch to open the container.

Image of Delta Spanner Wrench  - 1940s-1960s

Delta Spanner Wrench - 1940s-1960s

Delta Spanner Wrench manufactured by Pratt and Whitney. PWA p/n 144.

Image of Delta Pressure Gauge - 1940s-1960s

Delta Pressure Gauge - 1940s-1960s

Delta Pressure Gauge.

Image of Delta Pressure Gauge - 1940s-1960s

Delta Pressure Gauge - 1940s-1960s

Delta Pressure Gauge.

Image of Delta Socket Wrench Combination - 1947-1960s

Delta Socket Wrench Combination - 1947-1960s

3/4" Delta Combination Socket Wrench manufactured by Proto and supplied by Pratt and Whitney Proto p/n 6734, PWA p/n 2835.

Image of Delta Socket Wrench/Spanner Combination - 1947-1960s

Delta Socket Wrench/Spanner Combination - 1947-1960s

3/4" Delta Socket Wrench/Spanner Combination manufactured by Snap-On and supplied by Pratt and Whitney. Snap-On p/n 1544520, PWA p/n 1075-8.

Image of Delta Flexible Combination Wrench - 1940s-1960s

Delta Flexible Combination Wrench - 1940s-1960s

Delta handmade flexible combination socket/box end wrench.

Image of Delta Open-End Wrench - 1940s-1960s

Delta Open-End Wrench - 1940s-1960s

1/2" Delta handmade extended open-end wrench. Tool made at Delta TOC for taking cylinder heads off of reciprocating engines and access to tight spaces.

Image of Delta Open-End Wrench - 1940s-1960s

Delta Open-End Wrench - 1940s-1960s

9/16" Delta handmade extended open-end wrench. Tool made at Delta TOC for taking cylinder heads off of reciprocating engines and access to tight spaces. This one has "SMAN" carved into the base.

Image of Delta Open-End Wrench - 1940s-1960s

Delta Open-End Wrench - 1940s-1960s

7/16" Delta handmade extended open-end wrench. Tool made at Delta TOC for taking cylinder heads off of reciprocating engines and access to tight spaces.

Image of Delta Box-End Wrench - 1940s-1960s

Delta Box-End Wrench - 1940s-1960s

9/16" Delta handmade extended box-end wrench. Tool made at Delta TOC for taking cylinder heads off of reciprocating engines and access to tight spaces.

Image of Delta Box-End Wrench - 1940s-1960s

Delta Box-End Wrench - 1940s-1960s

1/2" Delta handmade extended box-end wrench. Tool made at Delta TOC for taking cylinder heads off of reciprocating engines and access to tight spaces.